Questions we get asked before an order.
Sizes, pressure classes, jointing, paying, collection and delivery. If the answer you need is not here, the enquiry form at the foot of the page reaches the same people.
Frequently asked questions
Questions we are asked about Wasser Pipes
Short, factual answers. Pipe answers come from the manufacturer's technical data, buying answers from Astral Industries Limited. If your question is about a specific project, send it through the enquiry form and the team will answer directly.
What sizes does Wasser HDPE pipe come in?
Nine outside diameters: 20, 25, 32, 40, 50, 63, 75, 90 and 110 mm, for water and gas. Wall thickness for every size and pressure class is published on the HDPE product page.
What pressure classes is Wasser HDPE pipe made in?
PN6, PN8, PN10, PN12.5, PN16 and PN20. The PN number is the recommended maximum operating pressure in bar at 25°C to 40°C. Not every size is made in every class: 20 mm is made in PN16 and PN20 only, and PN6 starts at 50 mm.
How do I pay for my order?
Pay by M-Pesa, Paybill 208911, before delivery, or approve the M-Pesa prompt we send to your phone. Pay only to Astral Industries Limited. Never to a personal number.
How long does delivery take?
Delivery takes 2 to 5 days, depending on the order and the route, and 5 days at most, even to remote places. The delivery place must be reachable by road. If it isn’t, we meet you at the nearest road a truck can reach. We call you about the delivery fee.
Can I collect my order?
Yes. Collect your order free, any day, from Mombasa, Infinity, Isinya or Eldoret, once it is confirmed.
What lengths is HDPE pipe supplied in?
Lengths vary from 6 to 100 metres. HDPE pipes can be produced in 50 metre to 100 metre lengths, which cuts the number of joints on a long run.
How is HDPE pipe joined?
By heat fusion. PE heat fusion joining forms leak-free joints that are as strong as, or stronger than, the pipe itself. For municipal applications, fused joints eliminate the potential leak points.
What is the maximum working temperature of HDPE pipe?
The maximum working temperature for the pipes is 65°C. The recommended maximum operating pressures are given at 25°C to 40°C.
Which pressure class do I need for a borehole or a pumped line?
As a rule of thumb, PN6 to PN10 suits gravity-fed and low-pressure lines, and PN16 to PN20 suits pumped mains and boreholes. When a pump is involved or the ground rises, size the pressure class up rather than down. The pipe size calculator in our sizing guide gives a starting point; a qualified plumber or engineer should confirm the design.
How do I choose the correct pipe diameter and pressure rating?
Start from the application, then the temperature and pressure the line will actually see. The published data gives maximum operating pressures that fall as temperature rises, along with outside diameter, inside diameter and wall thickness for each size. Final pipe sizing and pressure selection should be confirmed by a qualified plumber or engineer.
How can I request a Wasser Pipes quotation in Kenya?
Use the enquiry form on this page. Tell us your location or county, the type of project, the product you are interested in and a short description of the work, and the Astral Industries Limited team will respond with a quotation. Specifications and product codes for every system are published on the product range page if you want to review them first.
Request a quote
Tell us about the project
Send the details and the Astral Industries Limited team will come back with a quotation and the right specification for the work.
Prefer to review the range first?
Sizes, pressure classes and product codes for Wasser HDPE pipe are on the products page.
